- C7 Grand Sport 2014-2018
- C7 Z06 2014-2018
CARBON FLASH BLACK, PRIMER
ADD UNDERTRAY, NO UNDERTRAY
|Side Winglet, Deflector||
NO ENDCAPS, STAGE 2 WINGLETS, STAGE 3 DEFLECTORS (Z07)
What material are your splitters made of?
All the splitters are made using RTM Composite, which is a manufacturing technique involving several materials such as fiberglass molded in high temperature and compression. This process is much more rigid and durable than traditional hand-laid fiberglass.
How is the splitter installed? Is drilling required?
The splitter will require additional drilling as rivets are used to secure the components to the car; however, factory mounting hardware is also reused for additional support. The use of two-way tape is not recommended.
What is the undertray option, and do I need it?
The undertray adds an under-pan to the splitter increasing its rigidity and structural strength. The undertray is a great addition if you do heavy spirited driving as it will help withstand higher speeds while maintaining laminar airflow underneath, but it is not needed!
What surface finish should I get?
If you are wanting to paint the parts yourself or have someone else paint them, then Primer is the choice. Primer is an unpainted surface that requires a final sanding prior to paint. Satin Black is a matte finish similar to a plastidip effect. We do not recommend this finish unless you have a matte theme on your C7. Carbon Flash Metallic Black is our recommendation for all products on a C7 Corvette. This color will match the trim pieces found on your C7 including the front grill, rear diffuser, fender inserts. Essentially, all black accent pieces are in Carbon Flash Metallic Black.
Are these items in stock? When can I expect delivery?
Generally, we keep stock of all our products; however, in the event of a back order you will be notified with an estimated time (Typically, less than two weeks). Transit times vary on location, but 3-5 business is the standard time (delays due to customs are out of our control).
Will this splitter fit on my C7 Stingray?
No. You will need this version here.
Introducing the Z06 Splitter for the Corvette Grand Sport and Z06: The ultimate add-on that will bring your Corvette to the next level!
The Z06 Splitter is derived from the GM Z07 package that they spent a tremendous amount of time aero-testing. Took the concept and redesigned it in CAD and CNC machined it from the ground up with slight improvements in mind. The splitter is manufactured in our proprietary RTM process following the highest quality standards.
The result is a clean looking, durable, and aerodynamic component that will benefit the front end of your Corvette.
For Added Rigidity and Aerodynamic Performance:
Add our enhanced undertray option to enhance the aerodynamics by keeping all edges smooth and directing air with the minimum amount of turbulence. Additionally, it increases the rigidity of the component to withstand the dreadful driveway bump and scrapes. The undertray also has revised brake cooling ducts and added extra mounting points with linear fins, which keep airflow as laminar as possible.
Also available are Deflectors (Stage 2 & 3), which, similar to commercial jets, deflect and reduce airflow off the end of a wing (splitter) caused by drag. Deflectors will help navigate the airflow and therefore move more efficiently. Deflectors are also manufactured using RTM technology.